Chart Speed; Display Mode - Eagle MagnaView Installation And Operation Instructions Manual

CHART SPEED

The rate echoes scroll across the screen is called the chart speed. It's
adjustable by pressing the menu key until the chart speed menu appears.
Chart speed is set to maximum when the MagnaView is first turned on. To
decrease it, press the down arrow key. Press the up arrow key to increase
the speed again. The percent numbers in the Chart Speed menu box
shows the speed. Echoes scrolling onto the screen will also show the
effects of the change. If you reach the maximum or minimum level, an
warning tone sounds.
To stop the chart, first clear any menu from
the screen by pressing the ON/CLEAR key.
You can't stop the chart while a menu is
displayed. Now press the up arrow key. The
chart will freeze and the word "STOP" ap-
pears at the top right portion of the screen. To
start the chart, press the up arrow key again.

DISPLAY MODE

The MagnaView has three different screen modes. The MagnaView Plus
has six. To change modes, press the MENU key until the "DISP MODE"
(Display Mode) menu appears. Then press the up or down arrow keys until
the desired mode number appears. The modes are as follows:
MAGNAVIEW ONLY
CHT 1 (Chart #1)
This is the default mode used when the
MagnaView is first turned on. It has the
following features:
1. Automatic On
2. Fish ID Feature On
3. TargetTrack Feature On
4. Digital Depth Display On
14