Jacobsen G-Plex 3 Installation Instructions Manual page 10

4 OPS INSTALLATION
4.13 Position Strap Angle (4135067) and U-
clamps (4135068) to secure OPS frame to
chassis members. Leave hardware loose.
4.14 Fit OPS Frame (4135066) into position,
and secure with relevant hardware,
positioning hinges simultantously to the
chassis. Connect Hinge upper to Tank
cradle, using hadrware removed in item
4.6. Position hardware in slots to ensure
correct operation. Torque M10 = 46Nm.
4.15 Secure OPS Frame to Angle Clamp using
Hardware from kit. Torgue M8 = 23Nm incl
U-clamp hardware.
4.16 DIESEL MODELS ONLY
Attach Air Cleaner Bracket (4175900) to
OPS Frame using Hardware supplied.
GB-8
JACOBSEN G-PLEX III
OPS FITTING INSTRUCTIONS