Uniks M80 User Manual page 10

USER MANUAL M80
English language
1. Introduction / Product Package ......................11
2. Safety Measures ........................................ 11
3. Danger of electric shock and other dangers.. ....11
4. Intended Use ..............................................12
5. Tester Information .......................................12
6. Preparation for tests ...................................13
6.1 Auto-power on/ switching on................13
6.2 Auto-power off...................................13
6.3 Self-Test..........................................13
7. Conducting Tests..........................................13
7.1 Voltage Test ..................................13
7.2 Single-pole phase test ......................14
7.3 Phase Rotation Test...........................14
7.4 Trip Test of RCD................................14
7.5 Continuity test (Rx) / Diode test.............14
7.6 Resistance test..................................14
7.7 Torch Light ........................................15
7.8 Data Hold ..........................................15
8. Battery Replacement .....................................15
9. Technical Data ...............................................15
10. Cleaning and storage ....................................16
11. Safety advices ..............................................16
References marked on tester or in instruction manual:
Warning of a potential danger, comply with instruction manual.
Reference. Please pay utmost attention.
Caution! Dangerous voltage. Danger of electrical shock.
Equipment for working under live voltage
Continuous double or reinforced insulation complies with category II DIN EN 61140.
Conformity symbol, the instrument complies with the valid directives. It complies with the
EMC -Directive (2014/30/EU). Standard EN 61326-1 is fulfilled. It also complies with the Low
Voltage Directive (2014/35/EU), Standard EN61243-3:2014 is fulfilled.
Tester complies with the standard (2012/19/EU) WEEE
The instruction manual contains information and references, necessary for safe operation
and maintenance of the tester.
Prior to using the tester (commissioning/ assembly) the user is kindly requested to thoroughly read
the instruction manual and comply with it in all sections.
Failure to read the tester manual or to comply with the warnings and references contained
herein can result in serious bodily injury or tester damage.
10