Graco ProComp HVLP 3800 Instructions Manual page 8

Connect Fluid and Air Supply
Connect Fluid and Air Supply (Fig. 2)
• The Cart/Compressor provides the air supply for the
remote pressure pot.
• Circled letters indicate hose line connections.
1 Connect gun air supply hose (A) between turbine air
outlet (B) and gun air inlet (C). DO NOT use wrench
to tighten connections; hand tighten only.
2 If using a spray gun cup (D): Connect cup to gun
fluid inlet (E).
F . 2
IG
8
If using accessory remote pressure pots (F): Con-
nect fluid supply hose (G) between remote pressure
pot fluid outlet (H) and gun fluid inlet (E), or connect
pressure pot air hose (J) between pressure pot air
regulator inlet (K) and the cart compressor air outlet
(L).
Connect to Electric Supply
Plug turbine power cord into grounded outlet. Grounding
and Electric Requirements, page 7.
Setup
309907P