Graco ProComp HVLP 3800 Instructions Manual page 10

Preparing the Spray Surface
To get proper adhesion, ensure surface is completely
clean.
WARNING
Page 3
Sparks can be expected during normal operation
of turbine motor. These sparks can ignite fumes
from flammable liquids, dust particles, and other
flammable substances in the spray area.
• Use additional hose if necessary, and ensure
the turbine is operated in clean, dry, well ven-
tilated area.
• Never use turbine inside spray booth!
10
1 Turn turbine On a few minutes before spraying to
allow warm-up.
Note: When turbine is not in use for an extended period
of time, turn it off. The turbine does not shut off automat-
ically.
2 Ensure turbine filter is clean before operating. Clean
filter, page 11.
Note: To adjust spray gun pattern, see HVLP-Turbine
Gun manual 309205 (310750 Korean).
Setup
309907P