Table of Contents
Advertisement
Product Overview
About this product
About this product
Agilent The E5091A is a multiport test set used by connecting to the ENA Series RF
Network Analyzers. The main features of this instrument are:
•
•
•
•
•
NOTE
The E5070B/E5071B firmware version A.06.00 or higher is required for control of the E5091A-016.
NOTE
The E5070A/E5071A cannot control the E5091A-016.
26
The Agilent E5091A, controlled with the ENA Series RF Network Analyzers, lets you
measure a multi-port DUT by making the connection once. This decreases the time to
switch connections or wrong connections, improving the throughput significantly. The
number of ports varies depending on options as follows:
Option 009 (E5091A-009) 9 ports
Option 016 (E5091A-016) 25 ports
You can perform measurement in high frequencies (50 MHz to 8.5 GHz) required to
test RF devices for mobile communications and so on.
You can perform measurement while switching the paths of the DUT using the control
line.
The warm-up function stabilizes the internal temperature, improving the stability of
measurement.
The E5091A-016 provides the 13-port device, which executes measurements by
connecting the SMA cable attached to the unit and the 16-port device, which executes
measurement by removing the SMA cable.
*1. You cannot use all the ports simultaneously.
*1
2
Advertisement
Table of Contents
