Heat dissipation clearance
To satisfy the safety, specifications, and measurement accuracy of the product, you need to
keep the temperature around the product within a specific range by providing proper heat
dissipation clearance around the product or by air-cooling the inside of the rack forcefully
when you mount the product in the rack. For information on ambient temperature to satisfy
the specifications and measurement accuracy of the product, refer to the "Specifications
and supplemental performance characteristics" Chapter in Users Guide.
When the temperature around the product is kept within the temperature range in the
operating environmental specifications (see "Operating environment" on page 14), the
product complies with the safety standards. Furthermore, when the product is installed
providing the following heat dissipation clearance under the above temperature
environment, the product complies with the safety standards.
Table 1-3
Rear
Sides
Figure 1-4
Providing heat dissipation clearance
1
Requirements for installation environment
Condition
≥ 180 mm
≥ 0 mm (each for right and left)
Installation
15