Cleaning The Filter Combination And Tubular Filter; Low Fill Levels - Miele PG 8591 Operating Instructions Manual

Operation
Cleaning the filter
combination and
tubular filter
Resetting the
counter

Low fill levels

60
The filters in the wash cabinet must be checked daily and cleaned
regularly; see "Maintenance / Cleaning the filters in the wash cabinet".
The A 800 tubular filter can be used in special injector manifolds on
various mobile units and baskets and must be cleaned regularly.
Follow the cleaning instructions in the operating instructions for the
tubular filter.
A counter in the controls can be activated to remind you of the
required cleaning at regular intervals.
Clean filter combination?
Now
Later ( Programs)
Follow the instructions in the "Maintenance" section for cleaning the

filters. For the tubular filter, follow the instructions in the operating
instructions for the tubular filter.
The counter for the cleaning interval may be reset only after
cleaning has been completed.
Filter comb. cleaned?
Yes
No
- Yes
The counter is reset.
No
-
The counter will not be reset.
Select an option using the  and  arrow buttons and confirm your

selection with OK.
When the fill level is low in one of the containers, e.g., for process
chemicals or the salt reservoir, you are prompted to refill the
container.
Refill DOS
Acknowledge the messages with OK and refill the relevant

containers. To do this, follow the instructions in the sections
"Adding and dispensing process chemicals" and "Water softener".
Clean tubular filter?
Now
Later ( Programs)
Tubular filter cleaned?
Yes
No
Refill salt