System Messages; Cleaning The Filter Combination And Tubular Filter - Miele PG 8581 Operating Instructions Manual

Operation
Cleaning the filter
combination and
tubular filter
Resetting the
counter
58

System messages

After the machine is switched on or a program sequence is
completed, a series of system messages may be shown on the
display. These indicate e.g., low fill levels in the containers or required
maintenance.
The filters in the wash cabinet must be checked daily and cleaned
regularly; see "Maintenance / Cleaning the filters in the wash cabinet".
The A 800 tubular filter can be used in special injector manifolds on
various mobile units and baskets and must be cleaned regularly.
Follow the cleaning instructions in the operating instructions for the
tubular filter.
A counter in the controls can be activated to remind you of the
required cleaning at regular intervals.
Clean filter combination?
Now
Later ( Programs)
Follow the instructions in the "Maintenance" section for cleaning the

filters. For the tubular filter, follow the instructions in the operating
instructions for the tubular filter.
The counter for the cleaning interval may be reset only after
cleaning has been completed.
Filter comb. cleaned?
Yes
No
Yes
-
The counter is reset.
- No
The counter will not be reset.
Select an option using the  and  arrow buttons and confirm your

selection with OK.
Clean tubular filter?
Now
Later ( Programs)
Tubular filter cleaned?
Yes
No