Maintenance; Service - Miele PG 8591 Operating Instructions Manual

Maintenance

106

Service

Periodic checks must be carried out by Miele Service after
1,000 operating hours or every 24 months at the latest.
Maintenance covers the following:
- electrical integrity
- Door mechanism and door seal
- Any screw connections and connectors in the wash cabinet
- Water inlet and drainage
- Internal and external dispensing systems
- Spray arms
- Filter combination
- Sump including drain pump and non-return valve
- All wash carts, baskets, inserts, and modules
- Steam condenser
- Wash pressure sensor
- Drying unit
If there is a communication module:
- Connected printer
- Network connection
External documentation software and computer networks are not
tested by Miele Service.
The following operational tests will be carried out within the
framework of the maintenance:
- A program test run
- Seals will be tested for water tightness
- All relevant measuring systems will be safety tested, including fault
displays, thermo electrical measurements will be taken
- Safety features