GDC SX-4000 Installation Manual page 4

Thank you for purchasing a GDC SX-4000 Standalone Integrated Media
Block™ (SX-4000 Standalone IMB
Storage Plus from GDC Technology Limited.
To ensure proper operation and to maximize value of the SX-4000 with Enterprise Storage/
Enterprise Storage Plus, please review this Installation Manual. It will guide you through all the
features and benefits of the SX-4000 Standalone Integrated Media Block™.
COPYRIGHT NOTICE
Copyright © 2016 by GDC Technology Limited
All rights reserved. No part of this manual may be copied or distributed, transmitted, transcribed, stored in a
retrieval system, or translated into any human or computer language, in a form or by any means, electronic,
mechanical, photocopying, recording, magnetic, optical, manual or otherwise, or disclosed to third parties
without prior written permission of GDC Technology Limited.
MANUAL DISCLAIMER
This manual is made with SMS version 10.0 and there might be slight differences depending on the software
version the IMB is running. The contents, features and specifications stated in this manual are subject to
change without notice due to continuous product development and improvements. In no other event shall
GDC Technology Limited be liable for any loss of profit or any other commercial damages, including but not
limited to special, consequential, or other damages.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Installation Manual for SX-4000 Standalone Integrated Media Block™
with Enterprise Storage/Enterprise Storage Plus
®
) with Enterprise Storage/Enterprise
- 3 -
November 12, 2016