GDC SX-4000 Installation Manual page 25

4. INSTALLING ENTERPRISE STORAGE/ ENTERPRISE SOTRAGE PLUS
3. Now, the HDD can be taken out from the HDD tray.
Caution:

Please gently push the HDD tray when inserting to avoid damage to components.

Do not force the HDD tray into the slot if you think it is installed incorrectly. This may damage
the Enterprise Storage/ Enterprise Storage Plus.

The HDD labels should be facing up and the connector should be facing down when installing
the HDD onto the HDD tray.

Do not remove the HDDs during operation.

During operation, the temperature of the HDD may exceed 50°C. Please take care when
handling hot drives.
Installation Manual for SX-4000 Standalone Integrated Media Block™
with Enterprise Storage/Enterprise Storage Plus
- 24 -
November 12, 2016