Assembly And Adjustment; Operation; Maintenance - Worx WX255 Manual

Charging the Battery
NOTE:
1. Maximize Battery Performance
Prior to initial use, the battery must be
charged 5 hours to fully utilize the battery
capacity.
2. When the battery is full charged, the light
turns green.

ASSEMBLY AND ADJUSTMENT

Inserting and Removing the Bit
Cartridge
Assembling and Removing the Screw
Holder
Forward/reverse/lock
WARNING: Never change the
direction of rotation when the chuck
is rotating, wait until it is stopped!

OPERATION

Selecting a Bit
Drilling a Pilot Hole
Assembling screw
Tightening and Loosening Screw
Operating the On/Off Switch
WARNING: Do not operate for long
periods at low speed because excess
heat will be produced internally.
See Fig. A
LED Light Indicator
Automatic Spindle Locking
NOTE: When the slide driver is out of
power, this function enables the customer
tightening or loosening screws manually.
See Fig. B,C

MAINTENANCE

See Fig. D1,D2
Your power tool requires no additional lubrication or
maintenance. There is no user serviceable parts in your power
tool. Never use water or chemical cleaners to clean your power
tool. Wipe clean with a dry cloth. Always store your power tool
See Fig.
in a dry place. Keep the motor ventilation slots clean. Keep all
E1,E2,E2
working controls free of dust. If you see some sparks flashing
in the ventilation slots, this is normal and will not damage your
power tool.
FOR BATTERY TOOLS
See Fig. F1,F2
The ambient temperature range for the use and storage of tool
See Fig. G
and battery is 0
The recommended ambient temperature range for the
See Fig.
charging system during charging is 0
H1,H2,H3
See Fig. I1,I2
C-45 C.
O O
C-40
O O
See Fig. J
See Fig. J
19
C.