NAPCO iSecure Installation & Programming Instructions page 77

ISEC-WL-SIREN Wireless Siren Mounting Template
For Wall Outlets
Without a Center
Cover Plate Screw
This template shows the
unit plugged into the
bottom receptacle, but
either can be used (or
invert the unit as re-
quired).
Remove the two screws
from the siren housing
and replace screws with
bracket in place, as
shown.
E
NSURE THIS
BOX IS
1
INCH
X
1
INCH
Napco iSecure Security System
Screw Hole Tab
Magnet Screws (2)
(Use with battery
powered units only)
Magnet
1-5/8"
All technical manuals are available in PDF format at
Align this centerline
with Wall Socket
Slide Screw
(Use with battery
powered units
only)
tech.napcosecurity.com
"Center Line of
Wall Socket"
5-1/4"
7/16"
77