Table of Contents
Advertisement
While in capture mode, the volume key acts
as shortcut key to add frames. Press + or - to
scroll through frames or return to capture with
no frame.
Capture timer
Use the delay timer to add a delay time
between pressing the capture button and the
picture actually being captured. This can allow
enough time to take pictures of yourself.
To set the capture timer:
1. While in capture mode, select Options >
Capture timer.
2. Select 5 sec, 10 sec, or 15 sec, or
Deactivate to turn the function off.
Multi-Capture
The Multi-Capture enables multiple capture
shots, so the camera captures three or five
shots with a single click of the button.
To enable the multi-capture function:
1. While in capture mode, select Options >
Multi-Capture.
2. Select Deactivate for standard single
shots. For multi-capture shots, choose
46
from 4 Shot, 6 Shot, or 9 Shot.
Default Storage
Use the default storage option to set where
captured pictures are stored. You can store
captured pictures either in the handset (internal)
memory, or on a microSD™ card if installed.
To set the storage option:
1. While in capture mode, select Options >
Shortcut key
2. Highlight Handset or Memory Card,
for frames
Advance Setting
Use the Advance Setting option to configure
image quality, white balance, EV, night mode,
shutter sound, and AC frequency. You may also
restore all factory default camera settings from
this option.
Camera settings shortcuts
While on capture mode, the number keys also
act as shortcut keys for the camera settings.
The keys are assigned as follows:
1
�
3
4
5
�
7
Press the key repeatedly to change a given
setting. For example, if you press 4 for
Multi-Capture, pressing again enables you to
Default Storage.
then press OK to confirm.
Effect
White Balance
Capture Timer
Multi-Capture
Night Mode
Image Quality
Image Size
Advertisement
Table of Contents
