Advertisement
4
Siemens Building Technologies
Fire & Security Products
2
OPERATION
2.1
Turning on the Power
The SISTORE AX4 is operational in approximately 60 seconds after the power cable is
connected to the system. The Power LED on the front panel will turn ON, and this
action signifies the system has been turned on properly. The SISTORE AX4 may be
powered down by unplugging the power cord at the rear of the system. No on/off switch
is provided.
Figure 2:
SISTORE AX4 Front Panel
Display Modes
Press the desired camera number button to view the desired camera image, and press
the
QUAD/SEQ
button repeatedly to toggle between 2 x 2 screen and sequence display
modes.
Recording
Once you have installed the system following the instructions described in the User's
Manual, it is ready to record. There is no recording button on the front panel to initiate
recording video. The SISTORE AX4 will start recording video according to the schedule
configured by the user and from external and internal events such as alarm input or
motion detection events.
2.2
Playback Commands
Press the
button in the playback mode to enable a menu-driven search function
Menu
(detailed further in User's Manual).
Play and Fast Forwards: Press the button to play the images forward at
regular speed. Subsequent selection of the button toggles the
forward play speed.
Rewind and Fast Backwards: Press the button to play the images backward at
the regular speed. Subsequent selection of the button toggles the
backward play speed.
Pause: Press the button to stop playback and display the still image.
Next: Press the button after pressing the Pause button to move to the next
image.
Previous: Press the button after pressing the Pause button to move to the
previous image.
/
/
/
/
Advertisement
