Hitachi E990 Installation Manual page 8

Number
1
2
3
4. Position the controller so the front faces the front of the rack, and then slide the
controller gently onto the rails. Stop sliding when the mounting flanges on the front of
the controller touch the vertical face of the rack.
Note: Check the rear of the controller chassis to be sure the chassis is fit
securely into the stoppers.
Number
1
5. On the front of the controller chassis, attach the two bind screws and washers to each
side of the rack.
Hitachi Virtual Storage Platform E990 Installation Guide
Pin
Clip
Washer and bind screw
Stopper
Installing your storage system
Step 3: Install the controller into the rack
Item
Item
8