Hitachi E990 Installation Manual page 27

Connecting Fibre Channel ports to hosts
Important: Before connecting the storage system to a host, review the
requirements and detailed instructions in the Open-Systems Host Attachment
Guide.
Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. Connect the Fibre Channel data ports on each storage system controller to your Fibre
Channel switch.
2. Connect your Fibre Channel switch to the Fibre Channel HBA card in each host
computer or server.
Connecting iSCSI ports to hosts
Each controller supports 10-gigabit Ethernet copper (RJ-45) or optical (fiber) iSCSI
connectivity to your data network.
Important: Before connecting the storage system to a host, review the
requirements and detailed instructions in the Open-Systems Host Attachment
Guide.
Before you begin
Make sure the storage system is connected to your production network.
Procedure
1. Using the appropriate cable, connect the iSCSI data ports on each storage system
controller to your Gigabit Ethernet network switch.
2. Connect your Gigabit Ethernet network switch to the NIC or HBA card in each host
computer or server.
Step 11: Register your storage system with Hitachi Vantara
Support
If you do not already have an account on the
Otherwise, you will not be able to download and install the Hitachi Remote Ops monitoring
system.
Installing your storage system
Hitachi Virtual Storage Platform E990 Installation Guide
Connecting Fibre Channel ports to hosts
Support Website, you will need to register.
27