Hitachi E990 Installation Manual page 21

Protocol
MAC Address
IPv4 Configuration/ IPv6 Configuration
Network Connection Mode
Installing your storage system
Hitachi Virtual Storage Platform E990 Installation Guide
Running the Initial Setup wizard
IP addressing method to be used for
configuring the storage system.
Read-only field that shows the MAC
address for controllers 1 and 2.
IPv4 Address: IPv4 address of the
■
production network to which the
storage system will be connected
(IPv4 only).
IPv6 Address: IPv6 address of the
■
production network to which the
storage system will be connected
(IPv6 only).
Subnet Mask: IP address mask that
■
identifies the range of IP addresses in
the subnet to which the storage
system will be connected.
Subnet Prefix Length: Subnet prefix
■
length of the network to which the
storage system will be connected
(IPv6 only).
Default Gateway: IP address of the
■
default gateway to which the storage
system will be connected. The
gateway is the IP address of the router
used to communicate outside the local
subnet.
DNS Server 1-3: If your configuration
■
uses DNS to resolve IP addresses (for
example, the IP address for the NTP
server used with the storage system),
enter up to three DNS IP addresses.
Determines whether the storage system
negotiates the speed and duplex mode
automatically with the attached device.
The default setting (Auto-Negotiation)
connects the storage system at the
highest speed and appropriate duplex
setting supported by itself and the
connected device.
21