Table of Contents
Advertisement
(8) Incorporate the 1st reduction gear so that it may engage with the gear of the motor.
Incorporate the 2nd reduction gear so that it may engage with the 1st reduction gear.
Caution: In incorporating, be careful about the direction so that the smaller gear comes to the upper side.
Incorporate the 3rd reduction gear so that it may engage with the 2nd reduction gear and platen gear.
Caution: In incorporating, be careful about the direction so that the larger gear comes to the upper side.
(9) After assembling each gear, apply furoyl G-943 to the surface of 3rd reduction gear.
Rear
1st reduction gear
2nd reduction gear
3rd reduction gear
Rear
Surface of 3rd reduction gear (Apply furoyl G-943)
14
MLT-288 Service Manual
Advertisement
Table of Contents
