Typical Setups - E-Mu PS12 Owner's Manual

Typical Setups

This section shows some typical configurations for your PS12, including a single subwoofer setup, a dual subwoofer setup, and a
single subwoofer surround setup.
Single Subwoofer Setup
The most common single subwoofer configuration is as shown below, where the audio source's right and left line outputs are
connected to the right and left inputs of the subwoofer. The right and left satellite outputs are then connected to powered
monitor speakers.
If you use passive monitor speakers, you'll need to run the satellite
outputs to a power amplifier, which in turn feeds your passive speakers.
Powered Monitor
Left
Mixing Console
SUBWOOFER INPUTS SATELLITE OUTPUTS
90
80 60
1 00 80
1 20 55
1 00
60
1 20
55 flat 0 1 80 min max 40 1 35
R L LOWPASS PHASE LEVEL HIGHPASS
FREQ (Hz) FREQ (Hz)
SUB HIGHPASS NORMAL
GREEN - ON OFF
R L FOOT RED - BYPASS HIGHPASS
SWITCH STATUS
E-MU PS12 Precision Subwoofer
MODEL NO: PS12
INPUT VOLTAGE: 100V-120V 50/60HZ INPUT CURRENT: 2.5 A
INPUT VOLTAGE: 220V-240V 60/60HZ INPUT CURRENT:1.25A
Powered Monitor
Right
R L
R L
power
on off
voltage select
2.5A 250V 1.25A 250V V
100V-120V 220V-240V
CAUTION: TO REDUCE RISK OF FIRE
REPLACE FUSE AS MARKED
5