E-Mu PS12 Owner's Manual page 2

SAFETY & REGULATORY INFORMATION
Notice for the USA
FCC Part 15: This equipment has been tested
and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate
radio frequency energy and, if not installed and
used in accordance with the instructions, may
cause harmful interference to radio
communications. However, this notice is not a
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or
television reception, which can be determined
by turning the equipment off and on, the user
is encouraged to try one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the distance between the
equipment and receiver.
Connect the equipment to an outlet on a
circuit different from that to which the
receiver is connected.
Consult the dealer or an experienced radio/
TV technician.
CAUTION: To comply with the limits for the
Class B digital device, pursuant to Part 15 of
the FCC Rules, this device must be installed
with equipment certified to comply with the
Class B limits.
All cables used to connect the computer and
peripherals must be shielded and grounded.
Operation with non-certified equipment or
non-shielded cables may result in interference
to radio or television reception.
Modifications
Any changes or modifications not expressly
approved by the guarantee of this device could
void the user's authority to operate the device.
IMPORTANT SAFETY INSTRUCTIONS
• Read these instructions.
• Keep these instructions.
• Heed all warnings.
• Follow all instructions.
• Do not use this product near water.
• Clean only with a dry cloth.
• Do not block any ventilation openings. Install
in accordance with the manufacturer's
instructions.
• Do not install near any heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
• Do not defeat the safety purpose of the
polarized or grounding-type plug. A
grounding-type plug has two blades and a third
grounding prong. The wide blade of the third
prong are provided for your safety. If the
provided plug does not fit into your socket,
consult an electrician for replacement of the
obsolete outlet.
• Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit
from the apparatus.
• Only use attachments/accessories specified by
the manufacturer.
• Unplug this apparatus from the during lightning
storms or when unused for long periods of
time.
• Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way, such
as power-supply cord or plug is damaged,
liquid has been spilled or objects have fallen
into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
The following sections contain notices for various countries:
Notice for Canada
This apparatus complies with the Class B limits for
radio interference as specified in the Canadian
Department of Communications Radio
Interference Regulations.
Cet appareil est conforme aux normes de CLASSE
"B" d'interference radio tel que spe'cifie' par le
Ministère Canadien des Communications dans les
règlements d'interfèrence radio.
Important Notice
Your product has a serial number. Write this serial
number down and keep it in a secure area.
CAUTION
Take care to prevent the accidental operation of
your new speakers at excessive sound pressure
levels!
If you do not hear sound from your new speakers,
keep the volume controls at a low levels while
trying to restore sound. This will prevent
accidental operation at uncomfortably loud levels.
European Compliance
This product conforms to the following:
EMC Directive 89/336/EEC as amended by 92/31/
EEC and 93/68/EEC.
Mains operated products for the European market
comply with LVD Directive 73/23/EEC as amended
by 93/68/EEC.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC
SHOCK
DO NOT EXPOSE THIS APPARATUS TO RAIN
OR MOISTURE
DO NOT EXPOSE THIS APPARATUS TO
DRIPPING OR SPLASHING FLUIDS, AND
ENSURE THAT NO OBJECTS FILLED WITH
LIQUIDS — SUCH AS VASES — ARE PLACED
ON THE APPARATUS.
The mains plug and appliance couple are used as the
disconnecting devices. The speaker shall be placed near
a socket outlet which is easily accessible and readily
operable.
DECLARATION OF CONFORMITY
Manufacturer EU Importer
E-MU Systems, Inc. Creative Labs Ireland Ltd.
1500 Green Hills Road, Ballycoolin Business Park
Suite 101
Blanchardstown, Dublin 15
Scotts Valley, CA. 96066
IRELAND
United States
declares under its sole responsibility that the product
Trade Name: E-MU
Model Numbers: PS12/EM9100
has been tested according to the CISPR13 requirement and
found compliant with the following standards:
EMI/EMC: CISPR 13 : 2003, FCC Part 15 Subpart B
Complies with Canadian ICES-003 Class B
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including
interference that may cause undesirable operation.
Ce matériel est conforme à la section 15 des régles FCC.
Son Fonctionnement est soumis aux deux conditions suivantes:
(1) Le matériel ne peut étre source D'interférences et
Doit accepter toutes les interférences reques, Y
(2) compris celles pouvant provoquer un fonctionnement indésirable.
Compliance Manager Compliance Manager
E-MU Systems, Inc. Creative Labs Ireland
April 27, 2006 April 27, 2006
FLAMES - No flame sources, such as lighted
candles, should be placed on the apparatus.
POWER SOURCES - This product is specifically
designed for operation within the electrical
range(s) specified on the provided power adapter
and use outside of this range shall be at your own
risk. Please contact your local electric utility
company if you have any questions about the
electrical voltage at your intended location of use.
OVERLOADING - Do not overload wall outlets,
extension cords, or integral power circuits as this
can result in a risk of fire or electric shock.
OBJECT AND LIQUID ENTRY - Never push any
object through the product's openings, as they can
result in a fire, electric shock or damage. Do not
spill liquids on the product.
SERVICING - Do not attempt to service the
product yourself. Refer all servicing to qualified
service personnel.
PLACEMENT - Place the product on a stable
surface or recommended stand, or sold with the
product. Otherwise, the product may fall and cause
injury to a person, and damage to the product.
Follow the manufacturer's instructions for
mounting the product.
REPLACEMENT PARTS - When replacing parts,
check that the service technician has used
replacement parts specified by the manufacturer, or
have the same characteristics as the original parts.
Unauthorized substitutions may result in fire,
electric shock, or other hazards.
SAFETY CHECK - After servicing or repairing the
product, get the service technician to perform
safety checks to be sure that the product is working
properly.
i