Installing Muffler Pipe; Activating The Dry Charge Battery (If Applicable) - Miller Big Blue 401DX Owner's Manual

5-2. Installing Muffler Pipe

Tools Needed:
1/2 in

5-3. Activating The Dry Charge Battery (If Applicable)

1
Tools Needed:
OM-130 098 Page 18
3
2
5 A For 30 Minutes
OR
30 A For 12 Minutes
4
+
−
!
Stop engine and let cool.
!
Do not blow exhaust toward
air cleaner or air intake.
Top View
exh_pipe2 12/96 − 154 089-A / 154 611 / Ref. 206 030
!
Always wear a face shield,
rubber gloves and protective
clothing when working on a
battery.
Remove battery from unit.
4 Vent Caps
5 Sulfuric Acid Electrolyte
(1.265 Specific Gravity)
6 Well
Fill each cell with electrolyte to
bottom of well (maximum).
!
Do not overfill battery cells.
Wait ten minutes and check electro-
lyte level. If necessary, add electro-
lyte to raise to proper level. Reins-
tall vent caps.
7 Battery Charger
!
Read and follow all instruc-
tions supplied with battery
charger.
Charge battery for 12 minutes at 30
amperes or 30 minutes at 5 am-
peres. Disconnect charging cables
and install battery.
.
When electrolyte is low, add
only distilled water to cells to
maintain proper level.
drybatt1 6/05 − S-0886