Table of Contents
Advertisement
User Manual
Alarm
Using the linkage setup, it is also possible to link this alarm to one of the 2 available trigger outputs and
additionally configure post-recording times in addition to linking the alarm to a particular camera.
Post recording will continue to record locked video for the set time after the alarm has been cancelled.
Panel Alarm
This feature when configured is used to send an alarm when the front panel has been opened/accessed.
IO Alarm
The speed alarm function can be turned on by ticking the enable box.
You can also then configure the type of alarm reported (Alarm or Event).
Once enabled, you can configure the trigger type to high or low by selecting setup under the Trigger
column. Selecting high will mean that when a corresponding trigger input detects a positive voltage ap-
plied it will be active. Setting this to low will mean that when a corresponding trigger input detects a posi-
tive voltage disengage it will activate.
Using the linkage setup, it is also possible to link this alarm to one of the 2 available trigger outputs and
additionally configure post-recording times in addition to linking the alarm to a particular camera. The
alarm snap feature is not functional on this product.
Post recording will continue to record locked video for the set time after the alarm has been cancelled.
It is possible to copy the settings from 1 alarm to any or all of the others using the copy feature.
T:
+44(0)1420 487110
34
E:
echomaster@aampglobal-eu.com
W: EchoMaster-eu.com
MOBILE DVR RANGE
Base
Speed Alarm
The speed alarm function can be turned on by ticking the
enable box. You can also then configure the type of alarm
reported (Alarm/Event).
Once enabled you can configure the speed setting,
speed difference and alarm duration by clicking the
trigger setup.
Advertisement
Table of Contents
