Echomaster DVR-50 Series Installation Manual page 27

MOBILE DVR RANGE
Network - continued
Protocol type is set to N9M for the
Enable network, this sets how you want the DVR to connect to the server.
(Module1 is typically the SIM 3G/4G connection)
Register server IP, this is set by the server administrator,
EchoMaster Connected
for connection to the
Register server port is default to 5556 and
must not be changed.
Media server IP is default to
this is the default setting to be able to
EchoMaster Connected
connect to the
platform.
Media server port is default to 5556 and must
not be changed.
Remember to click save before changing tabs
or your settings will not be stored.
Navigate to the Server Status tab to check
the connection of the DVR to the Connected
platform. You can check the module being
used and the Server address here in this
menu.
NOTE: A subscription is required for access to the EchoMaster Connected platform.
EchoMaster Connected
platform.
echodvr.com
You are able to test the connection to the server by navigating to the
server status menu found within the System menu
platform and is default for most applications.
echodvr.com
is the default and is required
T: +44(0)1420 487110
E: echomaster@aampglobal-eu.com
W: EchoMaster-eu.com
User Manual
27