Echomaster DVR-50 Series Installation Manual page 30

User Manual
Record
General System
Allows the video output to be set as PAL or NTSC format.
Overwrite
The user is able to choose the manner in which data is overridden.
Capacity will overwrite data when the storage medium is full. Days will start
overwriting the storage medium after a set number of days (1-31). The 'Never'
setting will not allow any data to be overridden (recording will be suspended when
the storage medium is full.)
Lock duration
This determines the length of time that locked files are retained before they will be
overwritten (1-31 days).
Pre-recording
If an alarm is triggered this setting defines the length of pre-recorded time that is
locked. Sets the threshold for when the unit will boot up and return to normal
operation.
Main Stream Channel
Channel Name
Enable
Resolution
Frame rate
Quality
Record Mode
Audio
Alarm quality
Encode mode
T: +44(0)1420 487110
30
E: echomaster@aampglobal-eu.com
W: EchoMaster-eu.com
MOBILE DVR RANGE
Choose which channel to carry out settings on.
Assign a specific name to that channel.
Turn the channel on or off.
Set the recording resolution of the particular channel.
Set the desired frame rate for the chosen channel.
Choose the recording quality (1 is highest).
This can set the mode in which recording is started on that
particular channel. Power up will start recording as soon as
the device is turned on. Timer will only start recording on that
particular channel at specific times which can be set after this
option is highlighted and alarm which will only record that
channel when an alarm is triggered.
Allows audio to be recorded from any channel.
This can change the recording quality to a different level than
that of non-alarm recording. This means that the recording
level can be set to a lower quality to conserve storage space
but then switch to a higher quality when an alarm is triggered.
Choose whether files are encoded at variable bit rate (VBR) or
constant bit rate (CBR). You are able to copy the settings from
one channel to all others, or selected channels by using the
copy function.