Dvr-380-Th-Cab - For The Dvr-380 Range (Optional); Dvr-380-Th-Cab - Wiring Diagram - Echomaster DVR-50 Series Installation Manual

MOBILE DVR RANGE
DVR-380-TH-CAB - For DVR-380 devices
If using the DVR-380-TH-CAB, then this should be connected using the following guidelines
The DVR-380-TH-CAB adds the following functionality to the DVR.
u 8 x Configurable trigger inputs
u Speed pulse input
Follow the wiring diagram below for all connections.

DVR-380-TH-CAB - Wiring Diagram

1 2
21 22
Trigger IN:
1- 8 can be a high or low trigger value which is configured in the menu of the DVR-380.
Trigger OUT:
1 & 2 can be used to trigger external devices (such as a telematics device) when any trigger
input is activated. This is again configurable in the DVR-380 menu.
Speed Input:
Can be used to record speed information of the vehicle onto the recording captured on the
DVR-380. It should be connected to the analogue speed output wire on the vehicle (often found behind
the radio or instrument cluster).
u 2 x Configurable alarm outputs
u 1 x +12v accessory power output
T: +44(0)1420 487110
E: echomaster@aampglobal-eu.com
W: EchoMaster-eu.com
User Manual
Trigger 1 In (Green)
Trigger 2 In
(Orange)
Trigger 3 In
(Purple)
Trigger 4 In
(Light Blue)
Trigger 5 In
(Grey)
Trigger 6 In
(Light Green)
Trigger 7 In
(Pink)
Trigger 8 In
(Yellow)
+12V out
(Red)
GND out
(Black)
Trigger 1 out
(Blue/Black)
Trigger 2 out
(Blue/Black)
Speed in
(Blue)
GND out
(Black)
19