Initial Setup - Echomaster DVR-50 Series Installation Manual

MOBILE DVR RANGE
Initial Set-up
Note: Not all options are available on all devices and some options require additional add on accessories.
Insert your storage device (SD, HDD, etc) and power ON the unit.
Note: The DVR door must be closed if equipped and the lock locked.
Power ON the unit with the door closed using the ignition.
Once the DVR is powered on, you can navigate to the login process using the optional Touchscreen
monitor (MON-7010-TS) or by plugging a mouse (Not Supplied) into the device USB port.
Note: For devices with a door/access cover you may open it at this point to access the USB port, if no
USB device is recognised within a set time the DVR will power off.
The default Admin password is 'admin'
Touch the screen on the MON-7010-TS or right click on the mouse and the click on the
login.
You will now have access to all the various features and settings of the unit.
Once initial setup is complete, if connected unplug the mouse, close and lock the door and you are ready
to start using the product.
Note: It is always recommended to carry out a format on storage media using the internal format function
of the DVR before first use. (See page 37)
On later firmware devices the user is required to
change the default password.
The user will be shown the following message
on startup.
When Selecting 'OK' on the pop-up box
the user will be directed to the password
edit option.
The new Password must include;
Numbers, Letters, Upper and Lower case
and be no less than 8 characters in length.
T: +44(0)1420 487110
E: echomaster@aampglobal-eu.com
W: EchoMaster-eu.com
User Manual
icon to
21