Table of Contents
Advertisement
User Manual
Collection
Serial port
This allows you to configure all functions for the RS232 serial port when using
external devices, including the type of device connected and also the baud rate.
Speed
In this menu, the speed unit and source of the speed information can be configured.
Navigation
Currently can only be set to GPS.
Mileage
Source
Total
Base Value
Operation
Flow Limit
This allows you to set a maximum data transfer speed for live view etc.
Unit
Allows you to change the units for temperature etc.
T:
+44(0)1420 487110
32
E:
echomaster@aampglobal-eu.com
W: EchoMaster-eu.com
General
Sensor
You are able to select the source of the mileage information.
Displays the total miles covered since last reset.
This is the initial starting value for the mileage counter when reset.
This can be useful if swapping out units as the mileage counter from
the old unit can be inserted into this column to retain an accurate
record.
Clicking correct will adjust the mileage counter to that of the number
entered into the base value. Clicking clear will reset the mileage
counter to zero.
MOBILE DVR RANGE
Sensor Number
Choose which sensor you wish to
edit.
Overwrite
Assign a specific name to the
chosen sensor
OSD name
Assign a certain name that will be
displayed on screen when a sensor
is activated.
Advertisement
Table of Contents
