Table of Contents
Advertisement
Introduction
Document Details
Note
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause harmful interference to radio communications. Operation
of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expense.
This equipment is for use in a restricted access area.
Warning
Ensure power is disconnected from the AX11 before servicing the product or connecting/disconnecting
peripherals.
Document revision
V1.0
Levels of Access Control
• Attack Level/Grade: Level I
• Endurance Level/Grade: Level I
• Line Security Level/Grade: Level I
• Standby Power Level/Grade: Level I
Firmware
Firmware version can be verified and upgraded in the
Command dashboard at command.verkada.com.
Verkada Inc. 405 E 4th Ave, San Mateo, CA, 94401
sales@verkada.com
All specifications are subject to change without notice.
Copyright © Verkada Inc . All rights reserved.
Advertisement
Table of Contents
