Using The Expansion Slots - ECS P6VPA2 Manual

Using the Expansion Slots

This mainboard has five 32 -bit PCI expansion slots, one 4xAGP
slot, a Communications Networking Riser (CNR) slot, and an
Advanced Communication Riser (ACR) slot.
AGP Slot: The 4xAGP can be used to install a graphics adapter
that supports the 4xAGP specification and has the 4xAGP edge
connector.
ACR Slot: This slot can be used to insert an Advanced
Communication Riser card.
PCI Slots: The PCI slots can be used to install add-in cards that
have the 32-bit PCI (Peripheral Components Interconnect)
interface.
CNR Slot: This slot can be used to insert a Communications
Networking Riser card.
1. Before installing an expansion card, check the
document ation for the card carefully. If the card is not Plug
and Play, you may have to manually configure the card
before installation.
2. Remove the blanking plate from the slot in the system case
that corresponds to the expansion slot that you are going to
use.
28