Table of Contents
Advertisement
CMOS Setup Utility – Copyright (C) 1984 – 2000 Award Software
POWER ON Function
KB Power ON Password
Hot Key Power ON
Onboard FDC Controller
Onboard Serial Port 1
Onboard Serial Port 2
UART Mode Select
UR2 Duplex Mode
Onboard Parallel Port
Parallel Port Mode
ECP Mode Use DMA
Game Port Address
Midi Port Address
Midi Port IRQ
↑ ↓ → ← : Move Enter : Select
F5:Previous Values
Power On Function
This system can be resumed from a software powerdown or a power -
saving mode by password, hot key, mouse activity, or keyboard activity.
Use these items to enable or disable these features.
KB Power ON Password
Enables you to set a password when powering on the system with
keyboard activity.
Hot Key Power ON
Enables you to set a hot key combination to be used for powering on
the system.
Onboard FDC Controller
This option enables the onboard floppy disk drive controller.
Onboard Serial Port 1
Onboard Serial Port 2
These options are used to assign the I/O addresses and interrupt
requests (IRQs) for the two onboard serial ports.
Super I/O Device
Hot KEY
Enter
Ctrl-F12
Menu Level
Enabled
3F8/IRQ4
2F8/IRQ3
Normal
Half
378/IRQ7
ECP
3
201
330
10
+/-/PU/PD:Value:
F10: Save ESC: Exit
F6:Fail-Safe Defaults
F7:Optimized Defaults
Default: Enabled
Default: 3F8/IRQ4
Default: 2F8/IRQ3
54
Item Help
F1:General Help
Default: Hot KEY
Default: Enter
Default: Ctrl-F12
Advertisement
Table of Contents
