Using The Expansion Slots - ECS P6BAT-B Manual

Using the Expansion Slots

This mainboard has three 32-bit PCI expansion slots, one legacy 8/16-bit
ISA slot, and one AGP slot.
PCI Slots: The PCI slots can be used to install add-in cards that have
the 32-bit PCI (Peripheral Components Interconnect) edge connector.
ISA Slot: The ISA slot can be used to install add-in cards that have the
legacy 8/16-bit ISA (Industry Standard Architecture) edge connector.
AGP Slot: The AGP slot can be used to install a graphics adapter that
has the AGP (Accelerated Graphics Port) edge connector.
PCI1
PCI3
1. Before installing an expansion card, check the documentation for the
card carefully. If the card is not Plug and Play, you may have to
manually configure the card before installation.
2. Select which expansion slot you are going to use for your add-in
card.
3. In the system case, remove the blanking plate from the slot in the
system case that corresponds to the expansion slot that you are
going to use.
4. Position the edge connector of the add-in card over the expansion
slot. Position the metal bracket of the card in the empty slot in the
system case.
32
AGP
PCI2
ISA1