NOVOFLEX MagicBalance PRO75 User Manual

MBAL-PRO75
© NOVOFLEX Präzisionstechnik GmbH
Brahmsstraße 7
D-87700 Memmingen
Phone +49 8331 88888, Fax +49 8331 47174
Email mail@novoflex.com, Internet www.novoflex.com
MBAL-PRO75
USER MANUAL
Congratulations on your acquisition of the MagicBalance PRO75 – the new professional,
sturdy and easy to use levelling ball. Whilst you should have no difficulty in using the base,
you may find the following explanations useful.
Features
1
The levelling ball MBAL-PRO75 is the biggest version within the MagicBalance series,
which was designed especially for heavy devices. Whenever stability is the main aspect,
this base is particularly suitable for levelling heavy or voluminous equipment.
It can be tilted 15° in any directions and fixed with only one hand by means of the fixing le-
ver (2). Therefore, this base is suitable for all tasks, where only a little alignment is needed
and this adjustment should be done quick and simple. For example when a video head, a
telephoto gimbal head or a panoramic head should be levelled with the horizon. Because
of its ingenious design, the MagicBalance PRO75 is virtually maintenance free.
This levelling device can easily be combined with the Novoflex TrioPod PRO75 tripod by
dropping it into the 70 mm tripod basis mouth and also be used together with tripods from
third-party manufacturers. Therefor a standard 3/8" thread hole is located centered at the
bottom, which is equipped with an 1/4" reducer bushing (3). This adapter can be removed
if needed.
2
3