Lexus RX450hL Manual page 45

6 Register the Bluetooth
using your Bluetooth
 For details about operating the
®
Bluetooth device, see the manual
that comes with it.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible
®
Bluetooth devices. Depending on
the type of Bluetooth
connected, a message confirming
registration may be displayed on the
®
Bluetooth device's screen.
Respond and operate the Blue-
®
tooth device according to the con-
firmation message.
7 Check that the following screen is
displayed, indicating pairing was
successful.
 The system is connecting to the reg-
istered device.
 At this stage, the Bluetooth
tions are not yet available.
8
Check that "Connected" is dis-
®
device
played and registration is complete.
®
device.
®
device being
 If an error message is displayed, fol-
low the guidance on the screen to
try again.
If a cellular phone does not operate prop-
●
erly after being connected, turn the cellu-
lar phone off and on and then connect it
again.
Registering from phone
■
When registering from the system is
failed, or the phone name doesn't
appear on the registering screen, need
to connect the Bluetooth
manually.
1
Press the "MENU" button on the
Remote Touch.
2
Select "Phone".
3
Select "Yes" to register a phone.
4
Select "If you cannot find...".
5 Select "Register from Phone".
®
func-
6 Register the Bluetooth
using your Bluetooth
 For details about operating the
Bluetooth
that comes with it.
 A PIN code is not required for SSP
(Secure Simple Pairing) compatible
2-2. Connectivity settings
®
phone
®
device
®
device.
®
device, see the manual
45
2