Lexus RX450hL Manual page 212

212
7-2. Panoramic view monitor
WARNING
In low temperatures, the screen may
●
darken or the image may become
faint. The image could distort when the
vehicle is moving, or you may become
unable to see the image on the screen.
Be sure to visually check all around the
vehicle both directly and using the mir-
rors before proceeding.
● If the tire sizes are changed, the posi-
tion of the guide lines displayed on the
screen may change.
● The camera uses a special lens. The
distances between objects and pedes-
trians that appear in the image dis-
played on the screen will differ from
the actual distances. (
NOTICE
In panoramic view/moving
●
view/see-through view/Side Clear-
ance View/Cornering View, the sys-
tem combines images taken from the
front, back, left and right side cameras
into a single image. There are limits to
the range and content that can be dis-
played. Familiarize yourself with the
characteristics of the panoramic view
monitor system before using it.
● Image clarity may decline at the four
corners of the panoramic view/mov-
ing view/see-through view/Side Clear-
ance View/Cornering View. However,
this is not a malfunction, as these are
the regions along the border of each
camera image where the images are
combined.
● Depending on lighting conditions near
each of the cameras, bright and dark
patches may appear on the panoramic
view/moving view/see-through
view/Side Clearance View/Cornering
View.
●
●
●

P.241)
●
●
●
The panoramic view/moving
view/see-through view/Side Clear-
ance View/Cornering View display
does not extend higher than the instal-
lation position and image capture
range of each camera.
There are blind spots around the vehi-
cle. Accordingly, there are regions not
displayed in panoramic view/moving
view/see-through view/Side Clear-
ance View/Cornering View.
Three-dimensional objects displayed
in wide front view, rear view or side
view may not be displayed in pan-
oramic view/moving view/see-through
view/Side Clearance View/Cornering
View.
People and other three-dimensional
obstacles may appear differently when
displayed on the panoramic view mon-
itor. (These differences include, among
others, cases in which displayed
objects appear to have fallen over, dis-
appear near image processing areas,
appear from image processing areas,
or when the actual distance to an
object differs from the displayed posi-
tion.)
When the back door, which is
equipped with the back camera, or
front doors, which are equipped with
door mirrors that have built-in side
cameras, are open, images will not be
displayed properly on the panoramic
view monitor.
The vehicle icon displayed in pan-
oramic view/moving view/see-through
view/Side Clearance View/Cornering
View is a computer generated image.
Accordingly, properties such as the
color, shape and size will differ from
the actual vehicle. For this reason,
nearby three-dimensional objects may
appear to be touching the vehicle, and
actual distances to three-dimensional
objects may differ from those dis-
played.