Area of the image captured by the
camera
Wide front view
Rear view
The area around both corners of
A
7-2. Panoramic view monitor
the bumper will not be displayed.
Wide rear view
The area around both corners of
A
the bumper will not be displayed.
Black masking is done for distance
●
detection differences to the front of the
vehicle.
●
The area covered by the camera is lim-
ited. Objects which are close to either
corner of the bumper or under the
bumper cannot be seen on the screen.
The area displayed on the screen may
●
vary depending on vehicle orientation or
road conditions.
The camera uses a special lens. The dis-
●
tance in the image displayed on the
screen will differ from the actual distance.
239
7