Measuring Thick Transparent Materials; Measuring Special Transparent Materials - Barbieri Spectro LFP qb Operating Manual

Spectro LFP qb - Operating Manual

3.3.2 Measuring thick transparent materials

When measuring thick transparent materials like glass or plastic plates
use the sample holder C5H22. The recommended media thickness is
up to 5mm. The thicker the material is, the larger must the patches be.
For material of 5mm thickness the recommended patch size is 10mm.
The sample is fixed to the sample holder using a tape.

3.3.3 Measuring special transparent materials

When you measure transparent materials like textiles which you like to
measure in transmissive mode use the sample holder C5H50.
For measuring insert the sample between the two transparent sheets
of the sample holder and position inside the corner marks.
19