The Auto-Position Feature - Barbieri Spectro LFP qb Operating Manual

Spectro LFP qb - Operating Manual

4.4 The auto-position feature

The instrument is capable of automatically finding the position of the
sample to be measured.
When you insert a target for measurement, the instrument needs to
know where the patches are located. This is automatically determioned
by scanning some special border lines (auto-position lines):
If the sensing unit is connected to the platform, the autopositioning is
done by taking a picture with the camera and calculating the corner
points by the sensing unit.
If the sensing unit is not connected, or the picture processing fails, the
spectral unit is used to scan the lines and determine the corner points.
Please verify when inserting the target into the sample holder (specially
in transmission), that the space before the auto-position line is visible
and not covered by the sample holder or tape.
space to fix target with tape
min. 5mm white area before
black auto-position line
27