Measuring Transmissive Samples - Barbieri Spectro LFP qb Operating Manual

Spectro LFP qb - Operating Manual

3.2 Measuring transmissive samples

Transmissive materials must be measured using one of the following
sample holders:
1) The supplied standard transmission sample holder (C5H50).
For measuring insert the sample between the two transparent sheets
of the sample holder and position inside the corner marks.
2) The optional Frame transmission sample holder for M1 measure-
ments (C5H30)
This sample holder allows frame mounting og the color charts and
assures no UV-cut filtering occurs when measuring.
17