Barbieri Spectro LFP qb Operating Manual page 35

Spectro LFP qb - Operating Manual
Under "Settings", the WiFi connection can be enabled/ disabled.
The top status bar will indicate if instrument is connected by USB or
by WiFi interface.
Spot measurements are made and displayed by selecting "Spot Mode".
The measuring aperture and measuring condition (M0, M1 or M2) to
be used can be selected by selecting the corresponding indication in
the top status bar.
Place instrument on the spot color to be measured using the spot po-
sitioning guide and press the measure button:
The L*a*b* values are indicated on the display.
If a computer is connected, spectral informationis automatically trans-
ferred to the computer.
When pressing on Delta E button, the measured color can be saved as
a reference color and the deviation indicated as Delta E value can be
indicated foa all future spot measurements.
35