Usb / Wifi Connection - Barbieri Spectro LFP qb Operating Manual

Spectro LFP qb - Operating Manual

5.2 USB / WiFi connection

The instrument can be connected to a computer using a USB connection
or by using a WiFi connection.
Setting up the WiFi interface
WiFi connection needs to be set-up by selecting the "Settings" button
end selecting "WiFi" button.
Click on "Enable WLan" to enable the WLan interface.
Two connection types are supported:
- device to WLan (Router mode)
- PC to device (Access point mode)
When selecting "device to WLan", a list of available Wlans is indicated
and the desired WLan can be selected. In case of password protection,
the password is requested.
After successful connection, the IP address and MAC address are
indicated.
Please note: the instrument uses TCP/IP port 9760 to communicate
over the network with your software. Make sure this port is not blocked
by a firewall in your network.
36