Table of Contents
Advertisement
Plug and Play OS
When this parameter is set to Yes, BIOS initializes only PnP boot devices such
as SCSI cards. When set to No, BIOS initializes all PnP boot and non-boot
devices such as sound cards.
CAUTION Set this parameter to Yes only if your operating system is
Windows 95 (or higher).
Reset Resource Assignments
Set this parameter to Yes to avoid IRQ conflicts when installing non-PnP or PnP
ISA cards. This clears all resource assignments and allows BIOS to reassign
resources to all installed PnP devices the next time the system boots. After
clearing the resource data, the parameter resets to No.
Load Default Settings
You need to reload the BIOS default settings every time you make changes to
your system hardware configuration (such as memory size, CPU type, hard disk
type, etc.); otherwise, BIOS will keep the previous CMOS settings. Selecting
this option displays the following dialog box:
Do you want to load default settings?
[Yes]
[No]
Choosing Yes enables BIOS to automatically detect the hardware changes that
you have made in your system. This option also allows you to restore the
default settings.
Choosing No returns you to the main menu without loading the default settings.
48
System Utilities
Advertisement
Table of Contents
