Advertisement
SETTINGS
9
Apply Loc�te 243 to the thread
•
Tighten to 7Nm
•
Be careful not to exceed the specified
�ghtening torque
14/16mm Flat wrench
11
• Tighten the lower cartridge nut to a
torque of 10Nm
Be careful not to damage the rod and
the hydraulic stop
21mm Socket
10
• Carefully insert the rod into the cas�ng
12
•
Insert the high speed compression
adjustment knob 1
• Tighten screw 2 with Loc�te 243 to a
torque of 0.35Nm
1.5mm Allen key
SETTINGS
13
• Fill the hydraulic cartridge tube with
BOS Bioil
• The recommended amount of oil is
400ml
15
• Insert the lower crown, reposi�on the
frame stops and then the upper crown
• Make sure to respect the �ghtening
torque of the crown screws (6Nm lower
crown / 7Nm upper crown)
5mm allen key
10
14
• Screw the plug back onto the stanchion
to a torque of 10Nm
•
Do not exceed the specified torque as
this may break the threads of the parts
26mm Socket
11
Advertisement
