Table Of Contents - Grundfos Unilift AP35B Installation And Operating Instructions Manual

English (US) Installation and operating instructions
Original installation and operating instructions
These installation and operating instructions
describe Grundfos Unilift AP35B and AP50B.
Sections 1-6 give the information necessary to be
able to unpack, install and start up the product in a
safe way.
Sections 7-10 give important information about the
product, as well as information on service, fault
finding and disposal of the product.
CONTENTS
1. Limited warranty
2. General information
2.1 Hazard statements
2.2 Notes
2.3 Overview drawing
3. Receiving the product
3.1 Inspecting the product
3.2 Scope of delivery
4. Installing the product
4.1 Pipe connection
4.2 Minimum space
4.3 Location
4.4 Free-standing installation
4.5 Adjustment of cable length for a float
switch
4.6 Electrical connection
5. Starting up the product
6. Starting
7. Product introduction
7.1 Product description
7.2 Applications
7.3 Identification
7.4 Functions
7.5 Pump construction
8. Servicing the product
8.1 Cleaning the pump
8.2 Contaminated pumps
8.3 Replacement of parts
9. Fault finding the product
10. Technical data
10.1 Operating conditions
10.2 Sound pressure level
10.3 Storage
11. Disposing of the product
2
Read this document before installing the
product. Installation and operation must
comply with local regulations and
accepted codes of good practice.
Successful operation depends on
careful attention to the procedures
described in this manual. Keep this
manual for future use.
Page
3
3
3
4
4
4
4
4
4
5
5
6
6
6
6
7
8
8
8
8
10
11
11
11
12
12
12
13
15
15
15
15
15