Before You Begin - Juniper JUNOS J Series Quick Start Manual

Before You Begin

Before installing and connecting a Services Router, read Safety Warnings
Summary" on page 17.
Then make sure you have the equipment listed in Table 1 on page 5.
Table 1: Equipment Required for Services Router Installation
Electrical Connection
Electrostatic discharge (ESD) grounding
strap (not provided)
For AC power, an AC power cord with a
plug appropriate for your geographical
location (provided)
For DC power, 14 AWG DC power cables
with appropriate lugs (not provided)
For grounding, 14 AWG grounding cable
and lug for the router (not provided)
Routers with redundant power supplies
require an AC power cord (provided) or DC
power cables (not provided) for each power
supply.
CAUTION: A licensed electrician must attach a cable lug to the grounding and power
cables that you supply. A cable with an incorrectly attached lug can damage the
router.
If you are installing a J4350 or J6350 Services Router, take the following steps:
1.
Figure 1: Attaching Air Filter and Filter Cover
Rack Installation
For rack installation,
mounting screws
appropriate for your rack
and an appropriate
screwdriver (not provided).
Mounting brackets are
preinstalled on J2320 and
J2350 models, and must be
installed on J4350 and J6350
models.
Attach the air filter and filter cover, as shown in Figure 1 on page 5.
Before You Begin
Management Access
For CLI access:
Management device, such as a PC
or laptop, with a serial port (not
provided)
RJ-45 console (Ethernet rollover")
cable, with an RJ-45-to-DB-9
adapter (both provided)
For J-Web access:
Management device, such as a PC
or laptop, with an Ethernet port
(not provided)
Ethernet cable (not provided)
Before You Begin
5