thomann Fun Generation ColumnMix User Manual page 20

Connections and controls
Forward button. Press the button briefly to skip to the next track. Keep this button pressed to search forward for a
specific part of the current track.
6 [MASTER]
Rotary control to adjust the overall volume
7 [MUSIC] / [SPEECH] — [BASS BOOST]
Rotary control to adjust the bass.
Turn the control to the left to reduce the bass. Turn the control to the right to increase the bass.
8 [LEVEL]
Rotary control for adjusting the volume of the input signal at the line input
9 [STANDBY DISABLE | ENABLE]
When the switch is in the position [ENABLE], the device will turn off after approx. 30 minutes without input signal. To
turn it then back on again, switch [POWER] off and on again.
The indicator LED lights green during normal operation. If there is no signal input at the [MIC/GUITAR] jack for 30
minutes and the standby function is activated, the device will enter standby mode and the indicator LED lights red.
20
active speaker