Silvercrest SHD 7.4 A1 Operating Instructions Manual page 102

♦ Insert the 2-in-1 suction nozzle
the appliance. Make sure that the button for adjusting the brush
nozzle is facing upwards (see Fig. 2).
Fig. 2
♦ To adjust the 2-in-1 suction nozzle
the brush nozzle. Slide the brush nozzle forward if you want to
use the brush nozzle. Slide the brush nozzle backward if you
want to use the crevice tool (see Fig. 3).
Fig. 3
♦ To remove the 2-in-1 suction nozzle
2
opening
SHD 7.4 A1
(see Fig. 2).
w
into the suction opening
w
, hold down the button on
w
, pull it out of the suction
GB │ MT
2
of
│
99 ■