Chicco Essential Digital Audio Instructions For Use Manual page 23

sure with the liquid. If contact occurs, wash affected
the areas with plenty of water and seek medical
advice.
line - Do not use any charger not specifically
with provided for use with the equipment.
- Observe the markings (+) and (-) on the Lithium
ools battery and on the product to ensure proper
insertion and use.
- Do not use a lithium battery different from
the that supplied to power the device.
hat - Keep Lithium batteries away from the reach
of children.
uct, - This device has been designed to prevent and
inhibit the incorrect insertion of the lithium
vice battery: always observe the relative polarity
markings on the product and on the Lithium
e or battery to ensure proper use.
must - Do not use a model of battery that is different
than that stated in this instruction manual in the
hem device. The battery purchase reference code is
ery COD 20256400100
s if - Recharge the lithium battery only if assembled
inside the product and only using the mains
able adapter supplied (COD 20256400200). Do not
recharge the lithium battery using an external
not battery charger. Follow the instructions in this
ce's manual to recharge the lithium battery.
- Keep the battery and the battery contacts clean
on and dry. In the event that the contacts become
NG: dirty, clean the terminals with a soft, dry cloth. Do
ons. not use abrasives, chemicals or solvents to clean
the battery and its contacts.
- Lithium batteries require charging prior to
FOR use. Always refer to the instructions for correct
charging procedures.
ries. - Do not keep charging the lithium battery when
nals. not in use.
way - Keep the instructions manual for future
nals reference.
be - Always remove the Lithium battery from the
product when not in use.
heir - Dispose of properly according to the information
in this manual.
fire.
3.1 Installing Alkaline batteries not included in
ical the child unit (primarily in transmitter mode)
heck Remove the battery compartment closing panel
fore (8), placing your finger near the top groove and
ium and gently pulling the panel outward (fig.1).
Insert two 1.5 V Alkaline AAA/L03 batteries,
ery, respecting the proper insertion polarity as
yes indicated in the battery compartment.
Reposition the battery compartment closing
panel (8), first inserting the lower panel hooks in
their battery compartment housing and gently
pushing the panel toward the product (fig. 2).
3.2 Replacing Alkaline batteries not included in
the child unit (primarily in transmitter mode)
Remove the battery compartment closing panel
(8), placing your finger near the top groove and
and gently pulling the panel outward (fig.1).
Remove the two 1.5 V Alkaline AAA/L03
batteries and replace them with 2 similar 1.5V
AAA/LR03 batteries, taking care to respect the
proper insertion polarity as indicated in the
battery compartment. Reposition the battery
compartment closing panel (8), first inserting the
lower panel hooks in their battery compartment
housing and gently pushing the panel toward the
product (fig.2).
3.3 Installing the lithium-ion battery supplied
with the parent unit (primarily in receiver
mode)
Upon purchase, the 3.7V 800mAh rechargeable
lithium-ion battery (13) in the parent unit is kept
separately in the product packaging.
Carefully remove the lithium-ion battery from
its packaging.
Remove the rechargeable battery compartment
closing panel (9), placing your finger near the top
groove and and gently pulling the panel outward
(fig.3).
Insert the lithium-ion battery (13), respecting
the proper insertion polarity as indicated in the
battery compartment.
Reposition the battery compartment closing
panel (9), first inserting the lower panel hooks in
their battery compartment housing and gently
pushing the panel toward the product (fig.4).
3.4 Replacing the lithium-ion battery supplied
with the parent unit (primarily in receiver
mode)
If the duration of the rechargeable lithium-ion
battery is reduced excessively, this means that it
has run out and therefore must be replaced (this
is to be considered normal because rechargeable
batteries run out over time). Remove the
rechargeable battery compartment closing panel
(9), placing your finger near the top groove and
and gently pulling the panel outward (fig.3).
23