Chicco Essential Digital Audio Instructions For Use Manual page 19

asily however, could be reduced substantially within
ver, a home, depending on particular environmental
ains conditions, layout of walls and furniture
rom in the home and the presence of metallic
ems structures, external and internal interference/
eing electromagnetic fields, concrete walls or between
ting rooms on different floors or because batteries are
not fully charged, etc.).
unit
rent 1.2 Child Unit (primarily in transmitter mode)
ome Model 06607
1. Power via 100-240V~ 50/60Hz /6V
ters 500mA mains switching adapter or via two 1.5V
e is AAA/LR03 Alkaline batteries (not included)
2. On/Off button
the 3. Nightlight
s be 4. Night light On/Off button.
able 5. Power and link indicator light:
ose (a)Steady green: linked with parent unit
(b)Flashing green: absence of or loss of link with
parent unit
DO (c)OFF: child unit off
MPT 6. Alkaline battery status indicator light:
(a)Flashing red: Alkaline batteries almost flat
(b)OFF: Alkaline batteries charged or operation
HILD via mains adapter (1)
TO 7. Built-in microphone
HIS 8. Alkaline battery compartment closing panel
ALL 9. Child unit power connector
1.3 Parent unit (primarily in receiver mode)
Model 06607
HSS 1. Power via supplied rechargeable 3.7V 800mAh
gital lithium-ion battery or via 100-240V ~ 50/60Hz
an /6V
aby adapter
and 2. On/Off button
use 3. Volume adjustment buttons (3a and 3b)
lish 4. Lit level indicator bar for sounds emitted by
and the child
5. Power and link indicator light:
(a) Steady green: linked with child unit
(b)Flashing green: absence of or loss of link with
child unit (c) OFF: parent unit off
ogy 6 Rechargeable lithium-ion battery status
indicator light:
out (a)Flashing red: rechargeable battery almost flat
(b) Steady red: charging of rechargeable batteries
in progress via mains adapter (1)
200 (c) OFF: rechargeable battery charged or
cles operation via mains adapter (1) without
nge, rechargeable battery
500mA (1) mains switching
7. Built-in loudspeaker for sound reproduction of
sounds emitted by the child
This performs the following additional functions
at the same time:
a) Absence of or loss of link between child and
parent unit signal function: approx. 10 seconds
after the power and link indicator light (5) starts
to flash green, you will hear 2 consecutive beeps
per second. As soon as the link with the child unit
is restored, the signal switches off and the power
and link indicator light (5) will light up steady
green..
b) Rechargeable lithium-ion battery status almost
flat signal function:
you will hear 1 beep per second and the
rechargeable lithium-ion battery status indicator
light (6) will begin to flash red.
When charging of the rechargeable lithium-ion
battery begins, the beep switches off and the
rechargeable battery status indicator light (6)
lights up steady red until charging is complete.
8. ON/OFF voice activation or continuous
transmission selector
9. Rechargeable lithium-ion battery compartment
closing panel.
10. Belt hook
11. Holes for support cord (not included)
12. Power connector and/or rechargeable lithium-
ion battery charger
13. 3.7V 800mAh
battery via 100-240V ~ 50/60Hz /6V
500mA mains switching adapter
2. Description of features
2.1 Child unit (primarily in transmitter mode):
2.1.1 Power:
Power via 100-240V~, 50/60Hz /6V
500mA mains adapter or via two 1.5V AAA/LR03
Alkaline batteries (not included)
When power is supplied with mains adapter (1):
- insert the mains adapter jack (1) in the power
connector (9) on the side of the unit.
- verify that the voltage corresponds to the rating
plate of the previously indicated adapters.
- insert the mains adapter plug in an easily
accessible power socket.
Warnings
- The adapter cord may constitute a risk of
strangulation, keep out of reach of children.
- Periodically inspect mains adapters (1). If
19
rechargeable lithium-ion